Canon PowerShot SXE60 HS Getting Started Download Page 158

Page: 158 / 293

Color and Continuous Shooting

122

Change image color tones as desired, such as converting images to sepia or
black and white.

Press the

button, choose

in the menu,

and choose the desired option (p. 39).

The option you configured is now displayed.

Changing Image Color Tones (My Colors)

Still Images

Movies

My Colors Off

—

Vivid

Emphasizes contrast and color saturation, making images
sharper.

Neutral

Tones down contrast and color saturation for subdued
images.

Sepia

Creates sepia tone images.

B/W

Creates black and white images.

Positive Film

Combines the effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors
resembling images on positive film.

Lighter Skin Tone

Lightens skin tones.

Darker Skin Tone

Darkens skin tones.

Vivid Blue

Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.

Vivid Green

Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.

Vivid Red

Emphasizes reds in images. Makes red subjects more
vivid.

Custom Color

Adjust contrast, sharpness, color saturation, and other
qualities as desired (p. 123).

Summary of Contents for PowerShot SXE60 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Canon PowerShot SXE60 HS, Getting Started, Page: 158 / 293

Search results

Summary of Contents for PowerShot SXE60 HS

Reviews: