Canon PowerShot SXE60 HS Page 138 Getting Started Download

Page: 138 / 293

Specific Scenes

102

Shoot a large subject by taking multiple shots at various positions, and then
use the included software to combine them into a panorama.

Choose

Follow steps 1 – 2 on p. 93 and choose

Take the first shot.

The first shot will determine the exposure and
white balance.

Take additional shots.

Compose the second shot so that it partially
overlaps the image area of first shot.

Minor misalignment of overlapping portions
will be corrected automatically when the
images are combined.

Take up to 26 shots, the same way you took
the second shot.

Finish shooting.

Press the

button.

Use the software to combine the
images.

For instructions on merging images, refer to
the

ImageBrowser EX User Guide

Shooting Stitch Assist Images

Still Images

•

This function is not available when using a TV as a display while shooting
(p. 200).

Summary of Contents for PowerShot SXE60 HS






































































































































































































































































































Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Related manuals for PowerShot SXE60 HS

Brands by name

Popular brands

Canon PowerShot SXE60 HS, Getting Started

Search results

Summary of Contents for PowerShot SXE60 HS

Reviews:

Related manuals for PowerShot SXE60 HS

Brands by name

Popular brands