Canon PIXMA MX860 series, Service Manual

Page: 64 / 106

4-6. Verification After Repair
(1) Standard inspection flow
In each step below, confirm that printing is performed properly and the machine operates properly without any strange noise.
MX860 / MX868 --- 4. ADJUSTMENT / SETTINGS TABLE OF CONTENTS
EEPROM information print
<Check point>
- The information must be printed properly.
<Additional verification to be made> See 3-1. Major Replacement Parts.
- At logic board replacement
- At ink absorber replacement
- At platen unit or spur unit replacement
- At operation panel or LCD replacement
- At wireless LAN board replacement
Nozzle check pattern print
<Check point>
- The pattern must be printed properly.
Copy function
<Check point>
- Copying must be performed properly.
<Additional verification to be made> See
3-1. Major Replacement Parts .
- At document pressure sheet or scanner unit replacement
Communication with a connected computer
<Check point>
- Via USB connection to the computer, printing from the computer must be performed properly
(paper feeding from the rear tray and from the cassette respectively).
<Additional verification to be made>
- For repair of a specific problem, confirm the applicable specific function in the user mode.
PictBridge, IrDA communication, wired / wireless LAN, Bluetooth communication, Scan-to-
Memory function, Card Direct printing
PictBridge,
IrDA
LAN / WLAN Bluetooth
Scan-to-
Memory
Card Direct
Power-off in the service mode
<Check point>
- The paper lifting plate must be in the raised position.
External and internal appearance
<Check point>
- No grease, oil, or smearing on the timing slit strip film.
- No lifting of the platen ink absorber.
- No foreign material or dislocation of any part inside the printer.
- No damage or scratches that will affect the functionality.
Packaging
<Check point> See 5. MACHINE TRANSPORTATION .
- The carriage must be locked in the home position.
61 / 64