manualshive.com logo in svg

Canon PIXMA MX860 series, Service Manual

Share
Download
Canon PIXMA MX860 series Service Manual Download Page 6

1-2.  Customer Maintenance 

 

Adjustment

Timing

Purpose

Tool

Approx. 

time

Manual print head 
alignment

- At print head replacement 
- When print quality is not satisfying 

(uneven printing, etc.) 

To ensure accurate dot 
placement.

- Machine 

buttons 

- Computer 

(MP driver) 

10 min.

Print head cleaning

When print quality is not satisfying.

To improve nozzle 
conditions.

- Machine 

buttons 

- Computer 

(MP driver) 

1 min.

Print head deep 
cleaning

When print quality is not satisfying, and 
not improved by print head cleaning.

To improve nozzle 
conditions.

- Machine 

buttons 

- Computer 

(MP driver) 

2 min.

Ink tank replacement

When an ink tank becomes empty. ("No 
ink error" displayed on the monitor or on 
the machine LCD, or short flashing of an 
ink tank LED)

To replace the empty ink 
tank.  

--- 

1 min.

Paper feed roller 
cleaning

- When paper does not feed properly. 
- When the front side of the paper is 

smeared. 

To clean the paper feed 
rollers of the selected paper 
source (rear tray or 
cassette).

- Machine 

buttons 

- Computer 

(MP driver) 

2 min.

Bottom plate cleaning When the back side of the paper is 

smeared.

To clean the platen ribs. 
(Feed the paper from the 
rear tray.)

- Machine 

buttons 

- Computer 

(MP driver) 

1 min.

Scanning area 
cleaning

When the platen glass or document 
pressure sheet is dirty.

To clean the platen glass 
and pressure sheet.

Soft, dry, and 
clean lint-free 
cloth.

1 min.

Exterior cleaning

When necessary

To clean the machine 
exterior, or to wipe off 
dusts.

Soft, dry, and 
clean lint-free 
cloth.

1 min.

LAN resetting

When changing the network setting, etc.

To return the LAN setting to 
its original state.

- Machine 

buttons 

- Computer (IJ 

Network 
Tool) 

1 min.

Wired / Wireless 
LAN setting 
information display

When changing the network setting, etc.

To confirm the LAN setting 
information.

- Machine 

buttons 

- Host 

computer (IJ 
Network 
Tool) 

1 min.

FAX user data 
settings

When changing the telephone line type, 
etc.

To confirm the FAX user 
data settings.

- Machine 

buttons 

2 min.

FAX number data

When the printer is repaired, etc.

To confirm that the 
registered FAX numbers are 
retained.

- Machine 

buttons 

2 min.

3 / 64

Summary of Contents for PIXMA MX860 series











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands