Canon PIXMA G5000 Series Online Manual Download Page 88

Page: 88 / 422

Slide front paper guide (B) to align it with paper stack.

Align paper guide with where it clicks into place.

Slide right paper guide (C) to align it with paper stack.

Do not slide the paper guide too hard against the paper. The paper may not be fed properly.

Note

• Do not load sheets of paper higher than the load limit mark (G).

• Keep the paper stack height below the tabs (H) of the paper guides.

Summary of Contents for PIXMA G5000 Series







































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands

Canon PIXMA G5000 Series, Online Manual

Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands