Canon PIXMA G5000 Series Online Manual Download Page 87

Page: 87 / 422

Slide paper guides (B) in front and (C) on right to open guides.

Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in
center of cassette.

Important

• Always load paper in portrait orientation (D). Loading paper in landscape orientation (E) can

cause paper jams.

Note

• Align the paper stack with the edge of the cassette as shown in the figure below.

If the paper stack is in contact with the protrusion (F), the paper may not be fed properly.

Summary of Contents for PIXMA G5000 Series







































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands

Canon PIXMA G5000 Series, Online Manual

Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands