Canon PIXMA G5000 Series Online Manual Download Page 378

Page: 378 / 422

1303

Cause

Paper is jammed when feeding paper from cassette.

What to Do

Remove jammed paper.

• If the paper is jammed at the paper output slot:

1300

• If the paper is jammed inside the printer:

Paper Is Jammed inside Printer

• If the paper is jammed at the feed slot of the cassette:

After storing the output tray extension and the paper output tray, pull out the cassette and
remove the jammed paper slowly with both hands.

Important

• When checking the feed slot of the cassette or removing the jammed paper, do not turn the

printer upside down or tilt it. The ink may leak out.

• If none of the above is applied, see

Removing Jammed Paper from Rear Side

to open the rear

cover and to remove the paper.

Load paper in cassette properly.

Loading Paper in the Cassette

Press printer's

button.

The printer resumes printing. Reprint the page you were printing if it was not printed properly due to
the paper jam.

If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.

378

Summary of Contents for PIXMA G5000 Series







































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands

Canon PIXMA G5000 Series, Online Manual

Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands