Problem
Cause
Solution
Fold blade axis moving
The fold blade axis (book
thickness adjustment) is mov-
ing. This message clears when
the adjustment is complete.
If the message does not clear,
touch
ADVANCED > RE REF
FOLD BLADE NOT PARKED
Open the folder cover, remove
the paper, close the folder
cover. Touch START , then
follow the instructions on the
screen.
FOLD - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then
turn the machine ON. If the
problem continues, then call
your service engineer.
FORM CLAMP CLOSED
The form clamp is in the
wrong position. Touch START
to reset the position. Follow
the instructions on the screen.
FORM ROLLER ERROR
Open the folder cover, remove
the paper, close the folder
cover.
FORM ROLLER NOT PARKED
The form roller is in the wrong
position. Touch START to
reset the position. Follow the
instructions on the screen.
FORM CLAMP ERROR
There is an error at the former.
Open the folder cover and re-
move the book. If necessary,
open the main deck to remove
the book.
GATHERING AREA COVER
OPEN
Close the gathering area cover
if you need to operate the ma-
chine online.
INVERTER ERROR
Check for a paper jam and
clear if necessary.
Touch STOP to clear the
message from the screen. If
the problem continues, con-
tact your service engineer.
JAM AT BRIDGE INFEED
There is a paper jam at the in-
feed to the connecting bridge.
Clear the jam and continue.
JAM AT FORM ROLLER
Open the folder cover, remove
the paper, close the folder
cover.
4
Error Messages
Chapter 6 - Error Conditions, Problems and Solutions
79
Summary of Contents for Oce BLM550+
