manualshive.com logo in svg

Canon MX920 series, Online Manual

Share
Download
Canon MX920 series Online Manual Download Page 98

Computer Stops Operating during Scanning

Check 1: Restart the computer, reduce the output resolution in ScanGear
(scanner driver) and scan again.

Refer to "Output Settings" for your model from Home of the 

Online Manual

 for details.

Check 2: Delete unnecessary files to obtain sufficient free hard disk space,
then scan again.

Error message may appear if there is not enough hard disk space to scan and save, when the image size
is too large (such as when scanning a large item at high resolution).

Check 3: In Folder to Save Temporary Files of IJ Scan Utility, specify a
folder on a drive with sufficient free space.

Settings (General Settings) Dialog Box

Check 4: Multiple devices may be connected to USB ports.

Disconnect devices other than your scanner or printer.

Summary of Contents for MX920 series












































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands