manualshive.com logo in svg

Canon MX920 series, Online Manual

Share
Download
Canon MX920 series Online Manual Download Page 132

When authenticating the printer as a Bluetooth device using 

Bluetooth Settings

 built in the

computer
"TBPnnn (Canon XXX Printer (Copy X))" ("n" is a digit)
For Windows Vista or Windows XP
When authenticating the printer as a 

Bluetooth device

 in 

Control Panel

"BTHnnn (Canon XXX Printer (Copy X))" ("n" is a digit).
When authenticating the printer as a Bluetooth device using 

Bluetooth Settings

 built in the

computer
"TBPnnn (Canon XXX Printer (Copy X))" ("n" is a digit)
For more information about how to register the printer, see step 4 in Preparation.

6.

Click 

OK

.

•

Check 4: Is the message "This document failed to print" displayed?

• Do not retry printing. Check the Support Code on the LCD.

Clear the error according to 

Support Code List

.

• When you use a Microsoft Bluetooth driver, make sure that the 

Printing (HCRP)

 service is

effective on your computer.

In Windows 7:

Click 

Control Panel

. Select 

Devices and Printers

 under 

Hardware and Sound

, then select the

printer to be used for Bluetooth communication. Right-click and select 

Properties

.

Make sure that 

Printing (HCRP)

 on the 

Services

 sheet is checked.

In Windows Vista:

Click 

Control Panel

, 

Bluetooth Devices

 under 

Hardware and Sound

, then select the printer to

be used for Bluetooth communication and click 

Properties

.

Make sure that 

Printing (HCRP)

 on the 

Services

 sheet is checked.

In Windows XP:

Click 

Control Panel

, 

Bluetooth Devices

 under 

Printers and Other Hardware

, then select the

printer to be used for Bluetooth communication and click 

Properties

.

Make sure that 

Printing (HCRP)

 on the 

Services

 sheet is checked.

If 

Printing (HCRP)

 is not checked or the 

Printing (HCRP)

 service is not detected, follow the

procedure below and register the printer again.

1.

Select items from 

Control Panel

 as shown below.

•

In Windows 7, click 

Control Panel

, then 

Devices and Printers

 under 

Hardware and

Sound

.

•

In Windows Vista, 

Control Panel

, then 

Printers

 under 

Hardware and Sound

.

•

In Windows XP, click 

Control Panel

, then 

Printers and Faxes

 under 

Printers and Other

Hardware

.

2.

Click the 

 icon of the printer for printing via Bluetooth communication.

3.

Remove the printer following the procedure below.

•

In Windows 7, select 

Remove device

.

•

In Windows Vista, select 

Delete

 from the 

Organize

 menu.

•

In Windows XP, select 

Delete

 from the 

File

 menu.

4.

Authenticate the printer as a Bluetooth device from 

Control Panel

 as shown below.

•

In Windows 7, authenticate the printer as a Bluetooth device on 

Add a Bluetooth Device

in 

Hardware and Sound

 under 

Control Panel

.

•

In Windows Vista or Windows XP, authenticate the printer as a Bluetooth device on

Bluetooth Devices

, in 

Control Panel

.

For more information about the procedure, see Registering the Printer.

• This message is displayed when the print job is sent from the Bluetooth device while another print

job through the USB port is being printed out.
Printing will begin automatically when the print queue is finished.

Summary of Contents for MX920 series












































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands