manualshive.com logo in svg

Canon MX920 series, Online Manual

Share
Download
Canon MX920 series Online Manual Download Page 189

1600

Cause

If the lamp on the ink tank is flashing, ink may have run out.

Action

Replacing the ink tank is recommended.

If printing is in progress and you want to continue printing, press the machine's 

OK

 button with the ink tank

installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.

Note

If multiple ink lamps are flashing red, check the status of each ink tank.
Since the information contained in the fax may be lost if it is printed in this condition, the received fax

will not be printed and will be stored in the machine's memory until the ink is replaced. You must
manually print out faxes that were stored in the memory. You can change the setting so that the
received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax
information may not be printed because of the ink out condition.

Summary of Contents for MX920 series












































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands