manualshive.com logo in svg

Canon MX920 series, Online Manual

Share
Download
Canon MX920 series Online Manual Download Page 213

2803

Cause

The document is too long or is jammed in the ADF.

Action

Press the 

OK

 button to dismiss the error. Then make sure that the document you are loading meets the

machine's requirements before redoing the operation.

If the document is jammed, remove the jammed document following the procedure below.

•

If the original is jammed in the ADF:

Remove the document following the procedure below.

1.

If printing is in progress, press the 

Stop

 button.

2.

Turn off the machine.

3.

If a multi-page document is loaded, remove any pages other than the jammed page from the ADF,
then open the document feeder cover.

4.

Raise the paper release lever, then pull out the jammed page in the ADF, either from the
document tray or from the document output slot, whichever is easier.

If the document cannot be pulled out with ease, raise the document cover and pull out the jammed
page from the inner side of the document cover.

Summary of Contents for MX920 series












































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands