Canon MX450 series Online Manual Download Page 772

Page: 772 / 868

•

Check 2: Follow the procedure below to connect the machine

and the computer again.

Turn the machine off.

Unplug the USB cable from the machine and the computer, then
connect it again.

Turn the machine on.

•

Check 3: If you cannot resolve the problem, follow the

procedure below to reinstall the MP Drivers.

Click

Cancel

Click

Start Over

on the

Installation Failure

screen.

Click

Exit

on the "PIXMA XXX" screen (where "XXX" is your machine's

name), then remove the CD-ROM.

Turn the machine off.

Restart the computer.

Make sure that you have no application software running.

Insert the CD-ROM again, then install the MP Drivers.

•

In other cases:

Reinstall the MP Drivers.

If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and
then reinstall the MP Drivers.

Deleting the Unnecessary MP Drivers

If you reinstall the MP Drivers, install the MP Drivers on the Setup CD-ROM.

Note

If the installer was forced to be terminated due to a Windows error, the system may be in

an unstable condition and you may not be able to install the drivers. Restart your computer
before reinstalling.

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands

Canon MX450 series, Online Manual

Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands