Canon MX450 series Online Manual Download Page 643

Page: 643 / 868

Saving Scanned Data on the USB Flash Drive Using the
Operation Panel of the Machine

You can save scanned data on the USB flash drive using the operation panel of the machine.

Important

Do not remove the USB flash drive from the machine under the following conditions:

While scanning is in progress
Before saving the scanned data

For safety reasons, we recommend backing up the scanned data saved on a USB flash drive to

another media periodically to avoid unexpected accidents.

We assume no responsibility for damage to or loss of data for whatever reason even within the

warranty period.

Make sure that the machine is turned on.

Confirming that the Power Is On

Insert the USB flash drive into the USB flash drive port.

Inserting the USB Flash Drive

Press the

SCAN

button.

The

Scan menu

screen is displayed.

Note

If the Scan standby screen for forwarding the data to the USB-connected computer is displayed

on the LCD, press the

Menu

button to display the

Scan menu

screen.

Use the

button to select

Save to

, then press the

button.

Use the

button to select

USB flash drive

, then press the

button.

Specify the scan settings.

Specify each scan setting in order.

Note

For details on each setting item:

Setting Items on the Operation Panel of the Machine

1. Make sure that

Scan size

is selected, then press the

button.

2. Use the

button to select the scan size, then press the

button.

3. Make sure that

Data format

is selected, then press the

button.

4. Use the

button to select the data format, then press the

button.

5. Make sure that

Scan resolution

is selected, then press the

button.

6. Use the

button to select the scan resolution, then press the

button.

The Scan standby screen is displayed after all the settings have been specified.

Note

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands

Canon MX450 series, Online Manual

Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands