manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 41 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 41

Chapter 3

Printing   35

❏

In your Windows application for your document, make sure the 

number of copies to print is set to 1. Banner printing does not operate 
properly if you specify more than one copy.

❏

When Banner printing is selected, certain print options may be 

unavailable.

To prepare your printer for banner printing:

1.

Cut the banner paper one sheet longer than the document requires.

2.

Insert the banner paper into your printer. Make sure the printing 

surface faces up. 

3.

Gently hold the sheet in place until paper feeding starts.

To set your banner printing options and print your banner:

1.

In the Printing Type box, click Banner Printing.

2.

If the banner printing message box appears, click OK.

3.

In the Printer Properties dialog box, click OK.

4.

In the Print dialog box click the print command (usually OK or Print). 

If you are prompted to accept your printing options, click OK.

Using Printer Control (Windows 98/Me only)

0

You can define settings that control certain print operations.

1.

On the Page Setup tab, click Printer Control.

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments