manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 182 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 182

176   Troubleshooting

Chapter 8

If standby mode is displayed in photo print mode, there are valid 
images on the memory card. If a message is displayed, see 

Basic 

Guide

.

You have followed the procedures above and the memory 
card is still not recognized.

6

1.

Try again with another memory card.

1. Try with another memory card and if you do not experience a 

problem, the first memory card may be damaged. In this case, 
reformat the memory card with the digital camera.
When you reformat the memory card with the digital camera, all 
the data on the memory card will be deleted. If you can read 
image data on the computer, reformat the memory card after you 
have backed up the image data.

2. If you still have a problem with another memory card, the PC 

card adapter may be defective, or the card is having difficulties 
operating with the machine. Try again with a recommended 
memory card and PC card adapter.

Cannot write to the memory card (write protect error 
displayed in Windows).

6

1.

Is the machine in photo print mode and card protection set to 

<ON>?

Windows 98/ME: Switch to a different mode and set the <CARD 
PROTECT> setting to <OFF> (

Basic Guide

). Then disconnect and 

reconnect the USB cable.
Windows XP: Switch to a different mode and set the <CARD 
PROTECT> setting to <OFF> (

Basic Guide

).

If necessary, disconnect then reconnect the USB cable.

2.

If a delayed write failed error is displayed in Windows 2000

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments