Canon MultiPASS F60 Software User'S Manual Download Page 118

Page: 118 / 206

112 Scanning

Chapter 5

❏

Create a customized picture type by making changes to a predefined

picture type or defining your own custom picture type.

To customize a picture type:

Do one of the following:

•

To customize a predefined picture type, click the picture type,

and then click Adjust the quality of the scanned picture.

•

To customize a picture type, click Custom Settings and then click

Adjust the quality of the scanned picture.

In the Advanced Properties dialog box, specify the desired scan

settings.

•

Click the desired picture type.

•

To adjust brightness, move the slider to the left for less

brightness, or to the right for more. Or, enter the desired values.

•

For color or grayscale picture types, to adjust contrast, move the

slider to the left for less contrast, or to the right for more. Or, enter
the desired values.

Contrast slider available

for Color and Grayscale
picture types

Summary of Contents for MultiPASS F60















































































































































































































Search results

Summary of Contents for MultiPASS F60

Reviews:

Canon MultiPASS F60, Software User'S Manual, Page: 118 / 206

Search results

Summary of Contents for MultiPASS F60

Reviews: