manualshive.com logo in svg

Canon MultiPASS F60, Software User'S Manual, Page: 176 / 206

Share
Download
Canon MultiPASS F60 Software User'S Manual Download Page 176

170   Troubleshooting

Chapter 8

Problems printing from your computer

6

See below if you have tried unsuccessfully to print from your computer, 
or if you cannot print images scanned or faxed to your computer.

Cannot print at all.

6

1.

Is there anything displayed in the LCD?

If nothing is displayed, see 

Basic Guide

.

2.

Is the Alarm light blinking?

If it is blinking, see 

Basic Guide

.

3.

Is there a warning or attention displayed in the Status Monitor?

If displayed, see 

Basic Guide.

4.

Print the nozzle check pattern (P. 59).

5.

Are you trying to print in DOS?

You can only print in Windows and not in DOS.

6.

Is there an application error or General Protection Fault error 

displayed on the computer?
Is the application you are using to print with compatible with the 
operating system?

Refer to the application’s documentation. If the application is not 
compatible, generally you will be unable to print.

Has the application been allocated enough memory?

If other applications are open, close them to increase the available 
memory.

Refer to the application’s documentation to check the amount of 
memory the application requires.

Summary of Contents for MultiPASS F60















































































































































































































Reviews:

No comments