Canon MultiPASS F60 Software User'S Manual Download Page 149

Page: 149 / 206

Chapter 6

Viewing and Enhancing Images 143

In the Redeye Reduction dialog box, the original image appears on
the left. As you modify the image, you can see the results on the right.

Click Zoom In to zoom in on the eyes.

After zooming, if the eyes do not appear in the After box, click Scroll.

On the image in the After box, use the mouse pointer to circle the
eyes.

Click Select. On the image in the After box, drag the mouse pointer to

outline the eyes.

Click the appropriate eye color.

Move the slider to the right to increase the colored area, to the left to

decrease. Or, specify a value in the Amount box.

When you use the redeye reduction feature, you reduce the redness of the
eyes that appears on some images.

Summary of Contents for MultiPASS F60















































































































































































































Search results

Summary of Contents for MultiPASS F60

Reviews:

Canon MultiPASS F60, Software User'S Manual, Page: 149 / 206

Search results

Summary of Contents for MultiPASS F60

Reviews: