Canon MultiPASS F60, Software User'S Manual, Page: 159 / 206

Chapter 7 Fine-tuning the MultiPASS Suite 153
❏
Reduce to Fit Paper
You can specify whether you want an incoming fax reduced to ensure
the contents fits on the paper on which it is printed. If you want to
reduce the incoming fax, you can fit to height only, or both the height
and width, to fit the paper size.
❏
Answer Receive Mode
Click the mode by which you want the printer to receive incoming
calls:
• Automatically switch for receiving a call either as a fax or
telephone call
• Automatically receive only fax calls
• Require you to manually answer the incoming call, and then set
the printer for an incoming fax
• Automatically receive a call with your answering machine
• Automatically switch between receiving a call either as a fax or
telephone call based on the ring tone for each type of call. (U.S.
only. This setting is applicable only if you subscribe to a special
network service with your phone company that defines multiple
ring tones for your phone line.)
❏
Answer Silent Receive
Click to set the printer not to ring for an incoming fax.
❏
Answer Number of Rings
If you cleared the Silent Receive option, indicating you want the
printer to ring for incoming fax calls, click the number of times the
printer should ring for the fax call. The printer only rings if you have
connected an extension telephone.
❏
Receive Conditions
Click how the system should handle an incoming fax under the
following conditions: