Canon MultiPASS F60, Software User'S Manual, Page: 187 / 206

Chapter 8 Troubleshooting 181
White margins appear around the scanned image. 6
1. Specify the scan area.
In ScanGear, click Multi-Photo Scan to automatically specify the
scan area.
If there are white margins around documents such as
photographs, or if you want to trim a document (i.e. you want to
scan only one part of a document), specify the area of the scan
manually (P. 103).
To display ScanGear when scanning: On the Windows desktop,
on the Toolbar, click Settings. Click Show scanner driver before
scanning (P. 118).
2. When you do not want to display ScanGear
Even if you do not want to display ScanGear, you can make a
scan at the paper size specified and the area outside the paper
size will not be scanned. Do the following:
On the Windows desktop, on the Toolbar, click Settings. In the
Toolbar Settings dialog box, in the tab for the button used to scan,
specify the paper size (P. 114).
White lines appear on the left side of the image. 6
1. Place the document approximately 0.1 inches (3 mm) from the edge
of the platen glass.
Cannot scan multiple photographs correctly. 6
1. Does the position of the photographs and the way they are
positioned fulfil the following requirements?
• There should be a gap of at least 0.4 inches (1 cm) between the
edge of the platen glass and photographs.
• There should be a gap of at least 0.4 inches (1 cm) between the
edges of the photographs.