Canon MultiPASS F20, Basic Manual

Page: 44 / 110

6-6
Copying Chapter 6
Borderless copying
This feature allows you to copy colored images that fill the entire page without borders.
NOTE
• Use specialty papers with this feature ( p. 3-1).
• Note that with letter-size paper, a margin may still appear.
• You can only use this feature when the print media type setting is set to <GLOSSY>, <H.RES.>, or
<PHOTO>. For details on setting the print media type, see p. 3-7.
• You can only copy in color with this feature.
• Since the image is slightly enlarged to fill the entire page when copied, the image will be slightly
cropped at the edges.
• When borderless copying is selected, the LCD will display <100%+>.
Follow this procedure to make a borderless copy:
1
Load the document on the platen glass.
2
Press [Copy].
3
Use [
2
] or [
3
] to select the number of copies.
4
Adjust any necessary settings for your document ( step 4, p. 6-1).
• The scanning resolution is fixed to <COLOR FINE>. You cannot change this setting.
• You cannot use the [Color/B&W] key. Copying is fixed to color copying.
5
Press [Menu] five times.
6
Use [
2
] or [
3
] to select <BORDERLESS COPY>.
7
Press [Set].
• If <PLAIN> is selected as the print media, the LCD will display the following message:
Ex:
Press [Set], then use [
2
] or [
3
] to select <PHOTO>, <GLOSSY>, or <H.RES.> as the print media
type. Then press [Set].
8
Press [Start].
NOTE
• You can select the width cropped from the borders of the original image ( <EXTENSION AMOUNT>,
p. 11-3).
S I Z E : < L T R >
T Y P E : P H O T O
5 . S P E C I A L C O P Y
2 o n 1