Canon MultiPASS C755, Service Manual, Page: 107 / 143

3-56
MultiPASS C755 Chapter 3: Maintenance & Service
#7 PRINTER (printer function settings)
2. NUMERIC PARAM.
No. Function Selecting range Default setting
05 Trailing edge margin 0 ~ 9999 7 ( 7 mm)
for black&white copy & FAX
13 Trailing edge margin 0 ~ 9999 26 ( 26 mm)
for color copy & color FAX
[Parameter 07]
Sets the bottom margin for B/W printing (Copy & Fax). This parameter also sets the margins when
PRINT MARGIN
in user data is set to
SMALLER
for color printing.
[Parameter 13]
Sets the bottom margin for color printing. The margin used when
PRINT MARGIN
in user data is
set to
NORMAL
can be changed by this parameter when color printing. However, when the trailing
edge of the recording paper passes through the pinch roller when the margins have been narrowed,
there are cases where a small amount of color shift occurs at the bottom edge of the image.
5. INK ABS CAPA
This switch allows the waste ink capacity stored in the PCNT board to be checked or entered.
[SUCTION]
This allows the waste ink capacity for the ink absorbed during cleaning to be checked or entered.
When entering the waste ink capacity, use the numeric buttons to enter a value 0 to 100 (%).
The ink absorber's absorption capacity for the waste ink discharged by the BJ cartridge is
set to a certain amount. The waste ink capacity settings are stored in the PCNT board's
EEPROM. When replacing the PCNT board, check the waste ink capacity and enter the
waste ink capacity into the new PCNT board.
The various waste ink capacity can be checked with the
SYSTEM DUMP LIST
.
NOTE