Canon MultiPASS C755, User Manual

Page: 39 / 218

Chapter 2 Setting Up
2-17
Setting Up
Loading Paper
This section describes how to load plain paper in the multi-purpose tray so that you can
begin using your MultiPASS.
For complete details on the different print media you can use and instructions for
selecting and loading other print media,
1
Chapter 5, Paper Handling.
Paper Guidelines
• Store all print media wrapped and on a flat surface until ready to use. Keep opened
packs in their original packaging, in a cool, dry location.
• Store paper at 64.4°–75.2°F (18°–24°C), 40%–60% relative humidity.
• To avoid paper jams and poor print quality, do not print on damp, curled, wrinkled, or
torn paper.
• Use cut-sheet paper only, not paper that comes on a roll.
• Do not use paper thicker than can be used for the MultiPASS (
1
p. 5-2). Thick paper
can come into contact with the print head nozzles and cause damage to the BJ
cartridge.
• Do not load paper beyond the paper limit mark (
P
) or beyond the tabs on the multi-
purpose tray. Doing so may cause paper feeding or printing problems. Also, make
sure there are no gaps on either side of the paper stack.
• If the print media has a print side, set it in the multi-purpose tray with the print side
facing upward.
• The capacity of the output tray is 50 sheets of paper. To prevent paper jams, remove
paper from the output tray before the count reaches 50.
• Let the paper run out before refilling the multi-purpose tray. Avoid mixing “new” paper
with paper already loaded.
PAPER LIMIT MARK
NO GAP HERE
TAB