Canon MultiPASS C555 User Manual Download Page 93

Page: 93 / 212

Chapter 7

Sending Faxes

7-7

Sending F

Press

to begin scanning for

sending, or if you used speed dialing,
wait a few seconds for the MultiPASS to
begin scanning automatically.

• If you prefer the MultiPASS never to scan a

document automatically after a few seconds,
disable the

TIME OUT

setting. (

p. 14-5)

• To cancel sending once dialing has started,

press

Stop

then

. (

p. 7-9)

• You can scan up to 30 different documents for memory sending.
• When an error occurs during sending, the document is automatically deleted from

memory, even if it is not sent completely.

• If you attempt to send a color document to a fax machine that does not support color

faxing, the document will not be sent and the LCD will display

TRY AGAIN IN B&W

. Try

sending again in black & white. Alternatively, you can enable the

COLOR DIRECT TX

setting (

p. 14-5) that converts color faxes to black & white if the other party’s fax

machine does not support color faxing.

Manual Sending

Manual sending allows you to talk to the other party before sending the document. This
method is useful if the other party must manually set their fax machine to receive
before they can receive a fax.

Follow this procedure for manual sending:

For this mode, you need to have a telephone or an extension phone connected to your
MultiPASS. (

p. 2-6)

Open the document tray.

Adjust the document feed lever for the
document you are loading. (

p. 4-2)

Prepare the document and load it, face
down, in the ADF. (

p. 4-3)

• For color sending, press

Color/B&W

(Currently used memory)

turn on its light. (

p. 7-2)

• To adjust the resolution and contrast,

(

pp. 7-2, 7-4).

(Standby to scan)

Press .

• You can also lift the handset of the extension

phone connected to your unit instead of pressing

Hook

TEL=

Hook

DOCUMENT READY

MEMORY USED 0%

Start

Summary of Contents for MultiPASS C555





















































































































































































































Search results

Summary of Contents for MultiPASS C555

Reviews:

Canon MultiPASS C555, User Manual, Page: 93 / 212

Search results

Summary of Contents for MultiPASS C555

Reviews: