Canon MultiPASS C555 User Manual Download Page 29

Page: 29 / 212

Chapter 2

Setting Up

2-7

Setting Up

Connecting the MultiPASS to Your PC

To connect the MultiPASS to your PC, you will need to purchase a printer cable that
matches the interface connector on your PC:
• A Centronics

-compatible parallel cable (IEEE 1284-compliant) no longer than 6.6 feet

(2 meters)
-or-

• A USB cable no longer than 16.4 feet (5 meters)

You can purchase either of these cables from your local authorized Canon dealer.

You only need to connect one of the above cables.

Follow this procedure to connect the appropriate cable:

If using a USB cable, make sure your PC is running Microsoft Windows

98/Me or

Windows

2000, preinstalled by a computer manufacturer on purchase. (The USB port

operation also needs to be assured by the manufacturer.)

■

Connecting a Parallel Cable

Connect the parallel cable to
the MultiPASS and PC. Be sure
to secure the cable connectors
with the wire clips.

■

Connecting a USB Cable

Connect the USB cable during
software installation to ensure
proper operation of the printer
driver. (

MultiPASS Suite

User’s Guide)
Connect the USB cable to the
MultiPASS and PC.

Summary of Contents for MultiPASS C555





















































































































































































































Search results

Summary of Contents for MultiPASS C555

Reviews:

Canon MultiPASS C555, User Manual, Page: 29 / 212

Search results

Summary of Contents for MultiPASS C555

Reviews: