manualshive.com logo in svg

Canon MultiPASS C555, User Manual, Page: 91 / 212

Share
Download
Canon MultiPASS C555 User Manual Download Page 91

Chapter 7

Sending Faxes

7-5

Sending F

a

x

e

s

Dialing Methods

There are several ways of dialing the number of the party you want to send to. They
are as follows:

• Regular Dialing

Dial a fax number by using the numeric buttons, just like dialing a telephone number.

• One-Touch Speed Dialing

Dial a fax number by pressing the one-touch speed dialing button (01 to 12) that the
number is assigned to. For details on registering and using one-touch speed dialing,
(

1

pp. 6-3, 6-5).

• Coded Speed Dialing

Dial a fax number by pressing 

Coded Dial

followed by the two-digit code (00 to 99)

that the number is assigned to. For details on registering and using coded speed
dialing, (

1

pp. 6-6, 6-8).

• Group Dialing

Send a document to a predefined group of fax numbers. (The numbers must already
be registered under one-touch speed dialing buttons or coded speed dialing codes.)
For details on creating groups and using group dialing, (

1

pp. 6-9, 6-12).

• PC Dialing

Dial a fax number from your PC using the MultiPASS Suite. (

1

MultiPASS Suite

User’s Guide

)

Summary of Contents for MultiPASS C555





















































































































































































































Reviews:

No comments