manualshive.com logo in svg

Canon MultiPASS C555, User Manual, Page: 145 / 212

Share
Download
Canon MultiPASS C555 User Manual Download Page 145

12-12

Maintenance

Chapter 12

Replacing the BJ Cartridge

This section describes how to replace the BJ cartridge. Before replacing the BJ cartridge,
be sure to read the section 

When to Replace a BJ Cartridge or BJ Tank

. (

1

p. 12-8)

n

• The procedure explained here is the same for replacing an old BJ cartridge with a new

one, or simply exchanging the BJ cartridge for one of the optional BJ cartridges.

• Do not replace the BJ cartridge while the MultiPASS is printing or performing another

operation.

• You only need to replace the Color BJ cartridge when the print head is damaged or when

you have printed approximately 2000 pages. If ink runs out in this BJ cartridge, you can
replace individual BJ tanks (color or black) without having to replace the entire BJ
cartridge. (

1

p. 12-15)

Follow this procedure to replace the BJ cartridge:

1

Make sure the MultiPASS is plugged in.

2

Open the document tray.

3

Lift the document guides to open the
ADF (Automatic Document Feeder).

• If the ADF (Automatic Document Feeder)

does not open easily, slide the document
guides outward and then open the ADF
(Automatic Document Feeder).

• Or slide the Document Feed Lever to either

the automatic or manual setting.

4

Press 

C

.

DOCUMENT GUIDES

Summary of Contents for MultiPASS C555





















































































































































































































Reviews:

No comments