Canon MultiPASS C555 User Manual Download Page 31

Page: 31 / 212

Chapter 2

Setting Up

2-9

Setting Up

Main Components of the MultiPASS

Before using your MultiPASS, take a few moments to look over the unit and become
familiar with its components.

ADF (AUTOMATIC DOCUMENT FEEDER)
and PRINTER COVER
Holds documents to be scanned.

DOCUMENT SUPPORT
Holds documents as
they feed into the ADF.

PAPER REST
Supports print media
stacked in the multi-
purpose tray.

MULTI-PURPOSE TRAY
Holds plain paper and
other print media.

OPERATION PANEL
Controls the MultiPASS.
(

p. 2-11)

OUTPUT TRAY
Holds printed pages as
they exit the MultiPASS.

PAPER GUIDE
Keeps print media in position.
Adjust to the width of the print
media.

DOCUMENT GUIDES
Keep the document in
position when being
scanned. Adjust to the
width of the document.

DOCUMENT TRAY
When open, holds scanned
documents as they exit the
MultiPASS. When closed,
serves as a cover for the
operation panel.

OUTPUT TRAY EXTENSION
Holds printed pages as they
exit the MultiPASS.

PAPER OUTPUT GUIDES
Hold high resolution paper
when using the Photo BJ
cartridge. Also hold banner
paper.

Front View

Summary of Contents for MultiPASS C555





















































































































































































































Search results

Summary of Contents for MultiPASS C555

Reviews:

Canon MultiPASS C555, User Manual, Page: 31 / 212

Search results

Summary of Contents for MultiPASS C555

Reviews: