
Chapter 9
Special Features
9-3
Special Features
6
Use the numeric buttons to dial the country
Ex:
code, the area code, and the fax/telephone
number of the other party.
• If you enter the wrong number, press Stop
and start again from step 4.
7
If necessary, press
to enter a pause.
Ex:
• A pause at the end of a number (
P
) is fixed to
ten seconds.
8
Press
to begin scanning for sending.
• To cancel the transmission once dialing has
started, press Stop then
T
. (
1
p. 7-9)
n
To take advantage of the speed dialing features of your MultiPASS, register frequently
used overseas numbers for one-touch or coded speed dialing. (
1
pp. 6-3, 6-6)
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc.,
require tone dialing for their services. If your MultiPASS is connected to a rotary pulse
line, follow this procedure to set the unit temporarily for tone dialing:
1
Press .
• You can also lift the handset of the extension
phone connected to your unit instead of
pressing Hook.
2
Use the numeric buttons to dial the
Ex:
telephone number of the information
service.
• The unit connects using the pulses required by
your telephone line.
3
When the recorded message of the
Ex:
information service answers, press
to switch to tone dialing.
• When
T
is pressed,
T
is displayed in the LCD.
• If you pressed Hook in step 1, you can pick
up the handset of the extension phone if you
need to talk to the other party.
TEL=
7654321T
TEL=
7654321
TEL=
Hook
Start
TEL= 011p811234P
Redial /Pause
TEL= 011p811234
Tone