Canon MF735C Series, Service Manual

Page: 79 / 381

2. Enter [1] from the keyboard, and press [Apply].
CAUTION:
The following settings i.e. RGW-PORT in Service mode must not be change unless there are specific instructions to do so.
Changing these values will cause error in communication with UGW.
When the E-RDS function is enabled, the function to communicate with UGW is enabled.
3. Select [COM-TEST] and then touch [Yes].
If the communication is successful, "OK" is displayed. If "NG" is displayed, check the network settings and USW server
address (URL).
CAUTION:
The communication results with UGW can be distinguished by referring to the COM-LOG. By performing the communication
test with UGW, E-RDS acquires schedule information and starts monitoring and meter reads operation.
Maintenace
■ Initializing E-RDS settings
It is possible to clear the FLASH data of E-RDS and change the E-RDS setting back to the default value.
● Initialization procedure
Follow the procedure shown below to initialize E-RDS.
1. Enter service mode as a system administrator user.
2. Select the following service mode, and press [OK] to execute.
• COPIER > Function > CLEAR > ERDS-DAT
● Setting values and data to be initialized
The following E-RDS settings, internal data, and Alarm filtering information are initialized.
• COPIER > FUNCTION > INSTALL > ERDS
• COPIER > FUNCTION > INSTALL > RGW-PORT
• COPIER > FUNCTION > INSTALL > COM-LOG
CAUTION:
If a certificate other than the CA certificate at the time of shipment has been installed, initializing the E-RDS setting will not
change the settings back to those at the time of shipment. To change the certificate back to the CA certificate at the time
of shipment, delete the certificate (install the CA certificate at the time of shipment) after initializing the E-RDS settings.
■ Report Output of Communication Error Log (COM-LOG)
A report of communication error log information on five affairs can be output.
● Report output procedure
1. Select the following service mode, and press [Yes].
• COPIER > FUNCTION > MISC-P > ERDS-LOG
3. Technical Explanation (System)
70