Canon MF735C Series, Service Manual

Page: 293 / 381

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > VIFADJ
TR2BK-HV Adj sec transfer bias set VL (2nd side)
Detail To adjust the setting value of secondary transfer bias applied to the 2nd side.
Use Case When an image failure occurs
Adj/Set/Operate Method Enter the setting value (switch negative/positive by +/- key), and then press Apply key.
Display/Adj/Set Range -5 to 5
Default Value 0
Related Service Mode COPIER> ADJUST> VIFADJ> TR2SF-HV
ICL-HV Adj of ITB cleaning bias setting value
Detail To adjust the setting value of the bias to be applied at the time of ITB cleaning.
Use Case
When an image failure occurs
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by +/- key), and then press Apply key.
Display/Adj/Set Range
-5 to 5
Default Value
0
FU-TMP Adj of Fixing Film surface temp set VL
Detail To adjust the setting value of the surface temperature of the Fixing Film.
Use Case When an image failure occurs
Adj/Set/Operate Method Enter the setting value (switch negative/positive by +/- key), and then press Apply key.
Display/Adj/Set Range -2 to 2
Default Value 0
■ SCNR
COPIER (Service mode for copier) > ADJUST (Adjustment mode) > SCNR
SUB-S-Y0 Not use
SUB-S-M0 Not use
SUB-S-C0 Not use
SUB-S-K0 Not use
SUB-S-Y1 Not use
SUB-S-M1 Not use
SUB-S-C1 Not use
SUB-S-K1 Not use
SUB-S-Y2 Not use
SUB-S-M2 Not use
SUB-S-C2 Not use
SUB-S-K2 Not use
MAI-S-Y0 Not use
MAI-S-M0 Not use
MAI-S-C0 Not use
MAI-S-K0 Not use
MAI-S-Y1 Not use
MAI-S-M1 Not use
MAI-S-C1 Not use
MAI-S-K1 Not use
MAI-S-Y2 Not use
MAI-S-M2 Not use
9. Service Mode
284