Canon MF735C Series, Service Manual

Page: 291 / 381

COPIER (Service mode for copier) > ADJUST (Adjustment mode) > FEED-ADJ
ADJ-C2YR Adjustment of write start position in feed direction at Cassette 2 pickup (1st side of 2-sided
print)
Detail To adjust the write start position in the feed direction for the image on the 2nd side at the time of
pickup from the Cassette 2.
As the value is changed by 1, the leading edge margin is changed by 0.001 mm.
+: Leading edge margin becomes larger. (An image moves to the trailing edge side.)
-: Leading edge margin becomes smaller. (An image moves to the leading edge side.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
The setting is applied to the 1st side at 2-sided print.
Use Case When replacing the Engine Controller PCB/clearing RAM data
Adj/Set/Operate Method Enter the setting value (switch negative/positive by +/- key) and press Apply key.
Display/Adj/Set Range -5080 to 5080
Unit 0.001 mm
Default Value 0
ADJ-C2XR Adjustment of write start position in horizontal scanning direction at Cassette 2 pickup (1st
side of 2-sided print)
Detail To adjust the write start position in the horizontal scanning direction for the image on the 2nd side
at the time of pickup from the Cassette 2.
As the value is changed by 1, the left margin is changed by 0.001 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the Engine Controller PCB/clearing RAM data, enter the value of service label.
The setting is applied to the 1st side at 2-sided print.
Use Case
When replacing the Engine Controller PCB/clearing RAM data
Adj/Set/Operate Method
Enter the setting value (switch negative/positive by +/- key) and press Apply key.
Display/Adj/Set Range
-5080 to 5080
Unit
0.001 mm
Default Value 0
■ PANEL
COPIER (Service mode for copier) > ADJUST (Adjustment mode) > PANEL
TOUCHCHK Adj of coordinate pstn on Touch Panel
Detail To adjust the coordinate position on the Touch Panel of the Control Panel.
By making adjustment, the setting of TOUCH-R becomes 1.
Use Case When replacing the LCD Panel
Adj/Set/Operate Method 1) Select the item, and then press Yes key.
2) Press the nine "+" keys in sequence.
Related Service Mode COPIER> ADJUST> PANEL> TOUCH-R
TOUCH-R Touch Panel coordinate pstn adj result
Detail To set whether adjustment of the coordinate position on the Touch Panel of the Control Panel is
completed.
When adjustment with TOUCHCHK is completed, the setting of this item becomes 1.
Use Case When replacing the LCD Panel
Adj/Set/Operate Method
Enter the setting value, and then press Apply key.
Display/Adj/Set Range
0 to 1
0: Not completed
1: Completed
Default Value
0
Related Service Mode
COPIER> ADJUST> PANEL> TOUCHCHK
9. Service Mode
282