Canon MF735C Series, Service Manual

Page: 319 / 381

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
CNT-SW Set default Display items on charge counter
Detail To set default display items of the charge counter on the Counter Check screen.
For details of each type, refer to the Service Manual.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Type1
1: Type2
2: Type3
3: Type4
Default Value 0
CONTROL Charge setting of PDL job
Detail To set charge count transmission of PDL job to the connecting charging management device (Coin
Manager or non-Canon-made control card).
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: Output is available without control card. Not counted.
1: Output is available at insertion of the card. Counted.
2: Output is available at insertion of the card. Not counted.
Default Value
0
CTCHKDSP ON/OFF of charge counter list output
Detail To set whether to print the charge counter in the system management data list.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: ON, 1: OFF
Default Value 1
Additional Functions
Mode
Output Report > Print List > System Manager Data List
TNRB-SW ON/OFF of toner replacement counter display
Detail To set whether to display the toner replacement counter on the Counter Check screen.
When 1 is set, the user can check the toner replacement counter.
Use Case
Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Hide
1: Display (Toner replacement counters in the 190s)
2 to 3: Not used
Default Value 0
9. Service Mode
310