Canon MF735C Series, Service Manual

Page: 333 / 381

No. Parameter Allowable setting range
003 RTN transmission criteria n 2 to 99 times
004 RTN transmission criteria m 1 to 99 lines
005 NCC pause (before ID code) 1 to 60 sec
006 NCC pause (after ID code) 1 to 60 sec
008 STORED_DIAL_MODE wait timer 0 to 65 sec
010 T.30 T0 timer 0 to 9,999
(55 sec principally: 5,500)
011 T.30 T1 timer (for incoming transmission) 0 to 9,999
(France: 3,500, Others: 3,000)
012 Maximum incoming lines 0 to 65,535 lines
(0: without limitation)
013 T.30 EOL timer 500 to 3,000
(default 13 sec: 1,300)
015 Threshold between hokking nad on-hook 0 to 999
016 Lead time to the first response when switching between
FAX and TEL 0 to 9
017 Duration to activate pseudo-RBT cadence 0 to 999
018 Duration to deactivate pseudo-RBT cadence (short) 0 to 999
019 Duration to deactivate pseudo-RBT cadence (long) 0 to 999
020 Duration to activate pseudo-ring cadence 0 to 999
021 Duration to deactivate OFF Hook cadence (short) 0 to 999
022 Duration to deactivate OFF Hook cadence (long) 0 to 999
023 Not in use -
024 Not in use -
025 CNG monitor duration while the answering device is ac-
tivated 0 to 999
026 Not in use -
027 Not in use -
029 Off-hook PCB duty settings (For NAC, setting can be
made with SPL71100 in special management mode.) 1 to 99
049 NSX MODEL ID 0 to 4,095
051 Threshold to detect hook 0 to 9,999
053 Set DTMF calling counts when receiving FAX remotely 0 to 9,999
(default: 2)
054 Not in use -
NCU (NCU parameter setting mode)
■ TONE
Parameter No. Function Setting range
001 Tone signal sending time (PSTN) 10 to 9,999 msec
002 Minimum pause time (PSTN) 10 to 9,999 msec
■ PULSE
Item/Parameter No. Function Setting range
FORM Pulse digit format 0: DP (N)
1: DP (N+1)
2: DP (10-N)
001 Not in use
002 Not in use
003 Pulse dial make ratio 10 to 90 %
004 Minimum pause time 10 to 9,999 msec
9. Service Mode
324