Canon MF729Cx, Important Safety Instructions And Installation Manual

Page: 651 / 782

0SCJ-0CS
Correcting the Gradation
Gradation refers to the dark to light continuum of shades of a color. The more shades in the gradations of colors that are printed, the
more natural printouts seem. If color reproducibility becomes poor and the density and brightness of printouts differs markedly from the
originals, perform the appropriate auto adjustment. If the amount remaining in a toner cartridge is low, it is recommended that you
replace toner cartridges (
Checking the Amount Remaining in the Toner Cartridges ). There are three types of adjustments: Full
Adjust , Quick Adjust , and Adjust Copy Image .
Fewer shades in the gradations More shades in the gradations
Adjustments may not be performed effectively if there is not sufficient toner cartridge remaining.
This adjustment optimizes reproducibility for color printing. When the machine performs full adjustment, it obtains information to
optimize color reproducibility. The machine maintains this information until the next time you perform full adjustment. For making full
adjustment, an adjustment image will be printed twice and scanned twice. Note that you cannot perform this adjustment while
performing some functions, including, scanning, and printing.
This adjustment is not available when <Only Continue Black & White Printing> is selected on the screen displaying the
message <End of Toner Cart. Lifetime>.
Press and tap <Menu>.
Tap <Adjustment/Maintenance>.
Tap <Auto Adjust Gradation> <Full Adjust>.
Check that the size and type of paper displayed on the screen is loaded in the machine, and tap <OK>.
Confirm the procedure, and tap <Start>.
Adjustment starts. In approximately 1 to 2 minutes, an adjustment image is printed.
Open the feeder after the screen displayed during printing disappears.
Place the adjustment image on the platen glass with the print side face down.
Full Adjust
1
2
3
4
5
6
㻢㻡㻝㻌㻛㻌㻣㻟㻡