Canon MF720 Series, Service Manual, Page: 150 / 327

1. Remove the ADF Motor [1] in the direction of the
arrow.
• 2 screws [2]
• 1 belt [3]
[1]
[2]
[2]
[3]
2x
CAUTION:
When installing the ADF Pickup Motor, be sure to hook
the gear [1] of the motor on the belt [2].
[1]
[2]
CAUTION:
When installing the ADF Pickup Motor, be sure to install
with the connector [1] on the right side.
[1]
[1]
Removing the Scoopup sheet
holder
■ Preparation
1. Remove the Right Cover.(Refer to “Removing the
Right Cover” on page 120 )
2. Remove the Left Cover.(Refer to “Removing the Left
Cover” on page 118 )
3. Remove the ADF Unit + Reader Unit.(Refer to
“Removing the ADF Unit + Reader Unit” on page
130
)
4. Seaparare the ADF Unit from the Reader Unit.(Refer
to “Separating the ADF Unit + Reader Unit” on page
131 )
■ Procedure
CAUTION:
Be sure to perform "After Replacing the Scoopup sheet
holder (Refer to
“After Replacing the Scoopup Sheet
Holder” on page 143 )" when replacing the Scoopup
sheet holder, respectively.
4. Disassembly/Assembly
142