Canon LBP-1760, User Manual

Page: 88 / 234

80
The Standard Printing Environment Settings
PCL The printer is dedicated to the PCL personality and will not switch
to the PostScript personality automatically if it receives a PostScript
print stream. However, special commands sent to the printer with
the print stream can force the printer to switch to the PostScript
personality.
I/O TIMEOUT (input/output timeout) is the amount of time (measured in seconds)
that the printer waits for more data before it ends a print job. If data from other ports
frequently arrive in the middle of a print job, increase the setting.
This timeout setting is for the optional interface port only. You can also set the timeout
for the parallel interface (see page 78).
15 The timeout is set for 15 sec.
5 to 3000 To increase the number, press Value ; to quickly scroll to a higher
number in increments of 10, press and hold down Value .
To decrease the number, press Shift and Value ; to quickly scroll
back to a lower number in decrements of 10, press and hold down
Shift
and
Value
.
In addition to the items above, this menu allows you to set the following
four network settings:
IP ADDRESS
SUBNET MASK
GATEWAY ADDRESS
MAC ADDRESS
Please consult the Getting Started Guide for detailed information on
configuring the settings.
I/O TIMEOUT=
15
*