Canon LBP-1760 User Manual Download Page 11

Page: 11 / 234

Introduction

■

Typefaces

The printer comes with 45 scalable typefaces in 14 typeface families (Agfa 45

MicroType fonts) and 27 additional TrueType fonts, all compatible with application

software supporting Microsoft Windows. In addition, 9 bitmapped typefaces of the

Line Printer family are also included. The printer uses the Universal Font Scaling

Technology (UFST) for outline fonts, provided under license from Agfa-Gevaert

Japan, Ltd. Also supplied with the printer are the TrueType screen fonts for 110 font

solution and Canon Font Manager for easy management of installed fonts in Microsoft

Windows

98/95 and Windows NT version 4.0. A list of typeface samples is provided in

Appendix 1.

■

Printer drivers and utilities

The printer comes with printer drivers for Microsoft Windows 98/95, and Windows

NT 4.0. This allows you to control most printer settings from the Windows driver

screens.

You may need to install additional memory for duplex printing or for
printing large, complex files. See page 50.

Summary of Contents for LBP-1760











































































































































































































































Search results

Summary of Contents for LBP-1760

Reviews:

Related manuals for LBP-1760

Brands by name

Popular brands

Canon LBP-1760, User Manual

Search results

Summary of Contents for LBP-1760

Reviews:

Related manuals for LBP-1760

Brands by name

Popular brands