Canon LBP-1760, User Manual

Page: 101 / 234

93
4
Saving Downloaded Resources With Context Saving
Turning context saving on and off
Context saving preserves the state of the current personality when the printer switches
to another personality. The state of the original personality will be restored when
switched back.
The context saving feature will not appear as a menu item until the A5 module for
Adobe PostScript 3 is installed.
You must have at least 12 MB of memory (4 MB supplied as standard plus an
additional 8 MB) in order to use the context saving feature. (Context saving with the
duplex unit installed requires 16 MB of memory.)
Follow the procedure below to turn on context saving for one or both personalities.
1
Press Go to take the printer off-line. The On Line indicator should go off. PAUSED
will appear in the display.
2
Press Menu until you see MEMCONFIG MENU in the top line.
3
Press Item . PCL SAVE=OFF will appear in the bottom line.
4
To turn on context saving for PCL, press Value to display PCL SAVE=ON and press
Enter .
-or-
If you want to leave the PCL feature off, go on to the next step.
5
Press Item again . PS3=OFF will appear in the bottom line.
6
Press Value to select PS3=ON and press Enter .
7
Press Go to put the printer back on-line.
All downloaded resources are deleted when you change the context saving
setting. Download your fonts again. Your downloaded fonts remain in
memory until you change the context save setting again or turn the printer
off.