Canon LaserBase MF3220 Series, Service Manual

Page: 63 / 124

Chapter 3
3-19
F-3-118
2) Remove the right cover [1].
- 2 screws [2]
F-3-119
3.2.3.4 Removing the left cover
0012-1618
1) Remove the 2 screws [1] on the left cover.
F-3-120
2) Remove the left cover [1].
- 2 screws [2]
F-3-121
3.2.3.5 Removing the rear cover
0012-1619
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
F-3-122
3.2.3.6 Removing the Scanner Unit
0012-1620
1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
F-3-123
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
F-3-124
3.2.3.7 Removing the Operation Panel Unit
0012-1624
1) Detach the flat cable cover, and remove the flat cable [1] from the core [2].
- 2 screws [3]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[4]
[3]
[2]
[4]
[2]
[5]
[4]
[1]
[3]
[1] [2]