Canon LaserBase MF3220 Series, Service Manual

Page: 83 / 124

Chapter 3
3-39
F-3-247
3) As you remove the bosses on both sides [1], lower the front part of the
power supply assembly [2]. Then pull it to remove the power supply
assembly.
F-3-248
3.5.6.13 Removing the Main Motor
0012-1727
1) Place the main unit down on its front face (so that the interior of the main
unit is easily visible).
2) Remove the main motor [1].
- 2 screws [2]
F-3-249
3.5.7 Gear Unit
3.5.7.1 Removing the Cassette
0012-1728
1) Remove the cassette by holding the cassette handle.
3.5.7.2 Removing the front cover
0012-1729
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
and remove the front cover.
F-3-250
3.5.7.3 Removing the right cover
0012-1730
1) Remove the 2 screws [1] on the right cover.
F-3-251
2) Remove the right cover [1].
- 2 screws [2]
F-3-252
3.5.7.4 Removing the Gear Unit
0012-1732
1) Remove the drive plate (small) [1].
- 2 screws [2]
F-3-253
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[1]
[2]
[2]
[3]
[1]
[1]
[2]
[1]
[2]
[1]
[3]
[3]
[2]
[1]
[2]
[1]
[2]
[1]