Canon LaserBase MF3220 Series, Service Manual

Page: 49 / 124

Chapter 3
3-5
F-3-27
3.1.6.6 Removing the Scanner Unit
0012-1492
1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
F-3-28
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
F-3-29
3.1.6.7 Removing the Board Unit
0012-1494
1) Remove the four screw[1]onthe back of scanner unit.
F-3-30
2) Open the board unit [1] and disconnect the connector [2] and two flat
cables [3].
F-3-31
3.1.6.8 Removing the Operation Panel Unit
0012-1496
1) Detach the flat cable cover, and remove the flat cable [1] from the core [2].
- 2 screws [3]
F-3-32
2) Remove the 2 claws [2] on the operation panel unit [1], and remove the
operation panel unit.
[1]
[4]
[3]
[2]
[4]
[2]
[5]
[4]
[1]
[3]
[1] [2]
[1]
[2]
[3]
[1]
[1] [2]
[3]