Canon L250 Page 90 User Manual Download

Page: 90 / 282

Press START/COPY twice.

Use the numeric buttons to enter the number
you want to store.

The number can be up to 120 digits long.

Press the

button to enter spaces between

numbers (spaces are optional and are ignored

during dialling).

If you want to clear a mistaken entry, press the

button.

To enter a pause in the number, press the

REDIAL/PAUSE

button one or more times.*

Press START/COPY.

Press START/COPY again, then use the
numeric buttons to store the name that goes
with the number.

For details on entering letters, see page 3-3.

You can store up to 16 characters for the name.

Users in the UK can only enter one pause between digits in telephone/fax numbers.

TELEPHONE NUMBER

TEL=

Ex:

TEL=

1 538 4500

NAME

Ex:

Canon ESPAÑ_A

Speed Dialling

4-12

Summary of Contents for L250



























































































































































































































































































Search results

Summary of Contents for L250

Reviews:

Related manuals for L250

Brands by name

Popular brands

Canon L250, User Manual

Search results

Summary of Contents for L250

Reviews:

Related manuals for L250

Brands by name

Popular brands