Canon L250 Page 51 User Manual Download

Page: 51 / 282

The Toner Cartridge

Handling and Storing Cartridges

Do not expose the cartridge to direct sunlight or bright light for longer than

five minutes.

Do not open the drum protective shutter on the cartridge. If the drum surface

is exposed to light and damaged, print quality may deteriorate.

Do not stand the cartridge on end, and do not turn it upside down. If toner

becomes caked in the cartridge, it may prove impossible to free it even by

shaking the cartridge.

Keep the cartridge away from computer screens, disc drives, and floppy discs.

The magnet inside the cartridge may harm these items.

Never touch the drum protective shutter. When holding the cartridge avoid

touching the drum protective shutter with your hands.

Do not store the cartridge in direct sunlight.

Avoid locations subject to high temperature, high humidity, or rapid changes

in temperature. Store the cartridge between 0° and 35°C.

Hold the cartridge as shown so that your hand is not touching the drum

protective shutter.

HDD

2-25

Summary of Contents for L250



























































































































































































































































































Search results

Summary of Contents for L250

Reviews:

Related manuals for L250

Brands by name

Popular brands

Canon L250, User Manual

Search results

Summary of Contents for L250

Reviews:

Related manuals for L250

Brands by name

Popular brands