Canon L240 User Manual Download Page 98

Page: 98 / 212

7-16

Sending Faxes

Chapter 7

Printing a Document Set for Delayed Sending

Follow this procedure to print a document stored in memory for delayed sending:

Note

When you print a document stored in memory for delayed sending using the
following procedure, the print is reduced to 90% of the original.

Open the one-touch speed dial panel.

Press Delayed Transmission.

Use

▼

▲

to select

Press Set.

Use

▼

▲

to select the transaction number

(

) of the document you want to

print.
•

If you are unsure of the transaction
number (

.), print the DOC.

MEMORY LIST (

p. 9-5).

•

A “

” before the transaction number

(

) indicates that that

document is being sent at that moment
and can therefore not be selected.

•

Use

to display details of the

transaction (e.g. destination).

Press Set.

Press

to print the first page only, or press

to print all pages of the document.
•

The FAX prints the document.

To continue printing other documents set for
delayed sending, repeat the procedure from
step 5.
-or-
Press Stop to return to standby mode.

Ex:

)

Ex:

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands