manualshive.com logo in svg

Canon L240, User Manual

Share
Download
Canon L240 User Manual Download Page 27

2-13

Setting Up

Chapter 2

Se

tti

ng

 Up

Installing the Toner Cartridge

This section describes how to install the toner cartridge in the FAX for the very first 
time. If you are replacing a used toner cartridge, see p. 12-7.

Before installing the toner cartridge, be sure to read the following:
•

Use only FX-3 toner cartridges in your FAX.

•

Keep the toner cartridge away from computer screens, disk drives, and floppy 
disks. The magnet inside the toner cartridge may harm these items.

•

Do not store the toner cartridge in direct sunlight.

•

Avoid locations subject to high temperature, high humidity, or rapid changes in 
temperature. Store the toner cartridge between 0

 and 35

C.

•

Do not expose the toner cartridge to direct sunlight or bright light for longer than 
five minutes.

•

Store the toner cartridge in its protective bag. Do not open the bag until you are 
ready to install the toner cartridge in the unit.

•

Save the toner cartridge’s protective bag in case you need to repack and transport 
the toner cartridge at a later date.

•

Do not store the toner cartridge in a salty atmosphere or where there are corrosive 
gases such as from aerosol sprays.

•

Do not remove the toner cartridge from the FAX unnecessarily.

•

Do not open the drum protective shutter on the toner 
cartridge. Print quality may deteriorate if the drum 
surface is exposed to light or is damaged.

•

Hold the toner cartridge as shown so that your hand is not 
touching the drum protective shutter.

•

Never touch the drum protective shutter. When holding 
the toner cartridge, avoid touching the drum protective 
shutter with your hands.

•

Do not stand the toner cartridge on end, and do not turn it 
upside down. If toner becomes caked in the toner 
cartridge, it may prove impossible to free it even by 
shaking the toner cartridge.

Caution

Do not place the toner cartridge in fire. Toner powder is flammable.

Summary of Contents for L240





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands