Canon L240 User Manual Download Page 121

Page: 121 / 212

9-9

Special Features

Chapter 9

eci

Deleting a Document Stored in Memory

Follow this procedure to delete a document stored in memory:

Open the one-touch speed dial panel.

Press Memory Reference.

Use

to select

DELETE DOCUMENT

Press Set.

Use

to select the transaction number

(

TX/RX NO

.) of the document you want to

delete.

•

If you are unsure of the transaction
number (

TX/RX NO

.), print the DOC.

MEMORY LIST (

p. 9-5).

•

A “

” before the transaction number

(

TX/RX NO

.) indicates that that

document is being sent at that moment. If
you want to delete a document being
sent, follow the instructions in the LCD.

•

Use

to display details of the

transaction (e.g. destination).

Press Set.

•

If you are deleting a document stored in
the polling box (

p. 9-12), enter the

password that restricts access to the
polling box settings, then press Set.

Press

to delete the document.

•

If you change your mind and want to
keep the document in memory, press

To continue deleting other documents in
memory, repeat the procedure from step 5.
-or-
Press Stop to return to standby mode.

DOC. MEMORY LIST

DELETE DOCUMENT

TX/RX NO.

0_001

Ex:

TX/RX NO.

#0_003

Ex:

OK TO DELETE

YES=()) NO=(#)

ERASING END

15:00

FaxOnly

Ex:

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands