Canon L240 User Manual Download Page 53

Page: 53 / 212

5-3

Paper Handling

Chapter 5

r Ha

ndl

Printable Area

Selecting Paper for Your FAX

Follow these guidelines when selecting paper:

•

To prevent paper jams in the multi-purpose tray, do not use any of the following:

•

The following types of paper do not print well:

•

Make sure the paper is free from dust, lint, and oil stains.

•

Be sure to test paper before purchasing large quantities.

•

Store all paper wrapped and on a flat surface until ready to use. Keep opened
packs in their original packaging, in a cool, dry location.

•

Store paper at 18

-24

C, 40%-60% relative humidity.

Loading Paper

For instructions on loading paper in the multi-purpose tray, see p. 2-16.

–

Wrinkled or creased paper

–

Curled or rolled paper

–

Coated paper

–

Torn paper

–

Damp paper

–

Onion skin or very thin paper

–

Highly textured paper

–

Very smooth paper

–

Shiny paper

The shaded area shows the printable
area of A4-size paper.

MAX. 4 mm

MAX. 5 mm

MAX. 10 mm

FEED

DIRECTION

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands