Canon L240 User Manual Download Page 119

Page: 119 / 212

9-7

Special Features

Chapter 9

eci

Sending a Document Stored in Memory

Follow this procedure to send a document received in memory:

Open the one-touch speed dial panel.

Press Memory Reference.

Use

to select

Press Set.

Use

to select the transaction number

(

) of the document you want to

send.

•

If you are unsure of the transaction
number (

.), print the DOC.

MEMORY LIST (

p. 9-5).

•

A “

” before the transaction number

(

.) indicates that that

document is being sent or printed at that
moment, and can therefore not be
selected.

•

Use

to display details of the

transaction (e.g. destination).

Press Set.

Enter up to 125 fax numbers you want to send
to using any of the following methods:

❏

One-touch speed dialling:
Press the one-touch speed dialling
button(s) you want.

❏

Coded speed dialling:
Press Coded Dial, then use the numeric
buttons to enter the two-digit code you
want. Repeat for other codes.
•

Be sure to press Coded Dial before
each code.

Ex:

)

Ex:

Summary of Contents for L240





















































































































































































































Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands

Canon L240, User Manual

Search results

Summary of Contents for L240

Reviews:

Brands by name

Popular brands